Author Index

A

  • Abaszadeh, Ali Polycaprolactone/Polytetrahydrofuran Supramolecular Polymer Blends: Mechanical and Thermal Properties [Volume 25, Issue 2, 2012, Pages 151-163]
  • Abdollahi, Mahdi Synthesis of Polybutadiene Particles via Emulsion Polymerization: Effect of Emulsifier and Initiator Contents on the Reaction Kinetics and Latex’s Particle Size [Volume 25, Issue 5, 2013, Pages 351-364]
  • Ahmadi, Leila Sadat Thermal Protection Performance of Phase Changing Material Based on Polyethylene Glycol [Volume 25, Issue 3, 2012, Pages 193-202]
  • Akbari Roknabadi, Saeed Extension of Slitting Method for Simultaneous Measurement of Residual Normal and Shear Stresses in Polymer Composites [Volume 25, Issue 4, 2012, Pages 301-313]
  • Ako, Mohammad Heterogeneous Nucleation in Batch Foaming of Polystyrene in Presence of Nanosilica as a Nucleating Agent [Volume 25, Issue 3, 2012, Pages 231-240]
  • Ako, Mohammad The Effect of Surface Properties and Content of Nanosilica Particles on Polystyrene Foam [Volume 25, Issue 5, 2013, Pages 393-404]
  • Alimohammadi, Farbod Synthesis of Silver Nanoparticles in Cotton Fabric by Polyvinyl-2-pyrrolidone as a Reducing and Stabilizing Agent [Volume 25, Issue 4, 2012, Pages 265-275]
  • Alizadeh, Narges PMMA/CB and PMMA/MWCNTs Nanocomposites: Assessments through Optical Behavior [Volume 25, Issue 4, 2012, Pages 255-263]
  • Andideh, Mohammad Mechanical and Morphological Properties of Waste Short Nylon Fibers and Nanoclay Reinforced NR/SBR Rubber Nanocomposites [Volume 25, Issue 6, 2013, Pages 491-501]
  • Arabgol, Fatemeh Effect of Nanoclay on Mechanical Properties and Ablation Behavior of a Nitrile-Based Heat Insulator [Volume 25, Issue 6, 2013, Pages 449-458]
  • Ashori, Alireza Effect of Cationic Starch and Chitosan on Dry Strength of Bleached Soda Pulps Made of Pre-Extracted and Non-Extracted Bagasse [Volume 25, Issue 5, 2013, Pages 383-392]
  • Ataei, S. Ahmad Mechanical Properties and Kinetics of Thermal Degradation of Bioplastics based on Straw Cellulose and Whole Wheat Flour [Volume 25, Issue 1, 2012, Pages 65-74]
  • Atai, Mohammad Nanomechanical Properties of Photo-Cured Cyanoacrylate Bioadhesives Crosslinked by TMPTMA or POSS Nanostructures [Volume 25, Issue 1, 2012, Pages 53-64]
  • Atai, Mohammad Synthesis and Characterization of Low Density PMMA-based Microballoons [Volume 25, Issue 6, 2013, Pages 467-475]
  • Ayatollahi, Majid Reza Studies on Fracture Behavior of Epoxy/DWNT Nanocomposites by Molecular Dynamics Simulation [Volume 25, Issue 4, 2012, Pages 315-322]
  • Azadfallah, Mohammad Effect of Cationic Starch and Chitosan on Dry Strength of Bleached Soda Pulps Made of Pre-Extracted and Non-Extracted Bagasse [Volume 25, Issue 5, 2013, Pages 383-392]

B

  • Bagheri, Massoumeh Thermoresponsive Membrane Based on Thermotropic Liquid Crystalline Cholesteryl - (L-lacticacid)n System: Study of Its Drug Permeability [Volume 25, Issue 5, 2013, Pages 365-373]
  • Bagheri, Rouhollah Prediction of Mechanical Properties of LDPE-TPS Nanocomposites Using Adaptive Neuro-Fuzzy Inference System [Volume 25, Issue 3, 2012, Pages 171-180]
  • Bahramian, Ahmad Reza Thermal Protection Performance of Phase Changing Material Based on Polyethylene Glycol [Volume 25, Issue 3, 2012, Pages 193-202]
  • Bahramian, Ahmad Reza Effect of Nanoclay on Mechanical Properties and Ablation Behavior of a Nitrile-Based Heat Insulator [Volume 25, Issue 6, 2013, Pages 449-458]
  • Bahrani, Sajedeh Study of Thermal Properties, Turbidity, Effective Factors on Particle Size and Oscillatory Rheology of Pectin-Caseinate Biopolymer Nanocomplexes [Volume 25, Issue 6, 2013, Pages 433-447]
  • Bazaz, Abdol Karim Syntheses and Rheological Properties of Poly(nonadecanamide-co-ethylene glycol) Thickener [Volume 25, Issue 6, 2013, Pages 459-466]
  • Behrooz, Rabi The Effect of Degree of Substitution of Cationic Starch on Multi-layer Formation of Ionic Starches in Recycled Fibers [Volume 25, Issue 1, 2012, Pages 11-18]
  • Beigi Boroujeny, Saeed Synthesis and Characterization of Low Density PMMA-based Microballoons [Volume 25, Issue 6, 2013, Pages 467-475]

C

  • Chavooshi, Arash Effect of Nanoclay and Microwave Thermal Treatment on Mechanical Properties of MDF Dust-PP Nanocomposite [Volume 25, Issue 4, 2012, Pages 323-331]

D

  • Dabirian, Farzad Fabrication of Aligned Nanofibers by Manipulated Rotating Drum Method and Studying the Effective Parameters on Fibers Alignment by Image Processing [Volume 25, Issue 5, 2013, Pages 339-350]
  • Dadashi, Saeed Films Based on Poly(lactic acid) Biopolymer: Effect of Clay and Cellulosic Nanoparticles on their Physical, Mechanical and Structural Properties [Volume 25, Issue 2, 2012, Pages 127-136]
  • Dariushi, Soheil Bending Properties of Sandwich Beams with Fiber Metal Laminate Face Sheet [Volume 25, Issue 5, 2013, Pages 375-382]
  • Davachi, S. Mohammad Investigation of Dispersion, Interaction and Superstructure Formation in PTMEG/MWCNT Nanocomposites [Volume 25, Issue 4, 2012, Pages 289-300]

E

  • Ebadi Amooghin, Abtin DEA-Impregnated Cross-Linked Polyvinyl Alcohol/Glutaraldehyde Polymeric Systems as CO2/CH4 Gas Separation Membranes [Volume 25, Issue 6, 2013, Pages 477-489]
  • Emam D-Jomeh, Zahra Films Based on Poly(lactic acid) Biopolymer: Effect of Clay and Cellulosic Nanoparticles on their Physical, Mechanical and Structural Properties [Volume 25, Issue 2, 2012, Pages 127-136]
  • Ershad Langroudi, Amir Preparation and Characterization of Hybrid Nanocomposite of Polyacrylamide/Silica-Nanoparticles [Volume 25, Issue 5, 2013, Pages 405-414]
  • Esfandeh, Masoud Surface Modification of Silica Nanoparticles with Titanium Tetraisopropoxide and Evaluation of their Photocatalytic Activity [Volume 25, Issue 3, 2012, Pages 221-230]
  • Eslami, Zahra Study on Ablation Behavior of Phenolic Composites Prepared with Different Amounts of Zirconia and Asbestos Fiber [Volume 25, Issue 3, 2012, Pages 181-191]

F

  • Fakharian, Hossein Syntheses and Rheological Properties of Poly(nonadecanamide-co-ethylene glycol) Thickener [Volume 25, Issue 6, 2013, Pages 459-466]
  • Farahmandghavi, Farhid Polycaprolactone/Polytetrahydrofuran Supramolecular Polymer Blends: Mechanical and Thermal Properties [Volume 25, Issue 2, 2012, Pages 151-163]
  • Ferdowsi, Mohammad Synthesis and Characterization of Low Density PMMA-based Microballoons [Volume 25, Issue 6, 2013, Pages 467-475]
  • Firoozi, Mahtab Fabrication of Aligned Nanofibers by Manipulated Rotating Drum Method and Studying the Effective Parameters on Fibers Alignment by Image Processing [Volume 25, Issue 5, 2013, Pages 339-350]

G

  • Ghanbarzadeh, Babak Study of Thermal Properties, Turbidity, Effective Factors on Particle Size and Oscillatory Rheology of Pectin-Caseinate Biopolymer Nanocomplexes [Volume 25, Issue 6, 2013, Pages 433-447]
  • Ghasaban, Samaneh Nanomechanical Properties of Photo-Cured Cyanoacrylate Bioadhesives Crosslinked by TMPTMA or POSS Nanostructures [Volume 25, Issue 1, 2012, Pages 53-64]
  • Ghasemi, Ismail Polycaprolactone/Polytetrahydrofuran Supramolecular Polymer Blends: Mechanical and Thermal Properties [Volume 25, Issue 2, 2012, Pages 151-163]
  • Ghazanfari Moghaddam, Ahmad Mechanical Properties and Kinetics of Thermal Degradation of Bioplastics based on Straw Cellulose and Whole Wheat Flour [Volume 25, Issue 1, 2012, Pages 65-74]
  • Ghoreishy, Mir Hamid Reza Mechanical and Morphological Properties of Waste Short Nylon Fibers and Nanoclay Reinforced NR/SBR Rubber Nanocomposites [Volume 25, Issue 6, 2013, Pages 491-501]
  • Gilani, Medi Preparation and Characterization of Hybrid Nanocomposite of Polyacrylamide/Silica-Nanoparticles [Volume 25, Issue 5, 2013, Pages 405-414]

H

  • Hadi, Zohreh Fabrication of Aligned Nanofibers by Manipulated Rotating Drum Method and Studying the Effective Parameters on Fibers Alignment by Image Processing [Volume 25, Issue 5, 2013, Pages 339-350]
  • Hamishehkar, Hamed Study of Thermal Properties, Turbidity, Effective Factors on Particle Size and Oscillatory Rheology of Pectin-Caseinate Biopolymer Nanocomplexes [Volume 25, Issue 6, 2013, Pages 433-447]
  • Hamzeh, Yahya The Effect of Degree of Substitution of Cationic Starch on Multi-layer Formation of Ionic Starches in Recycled Fibers [Volume 25, Issue 1, 2012, Pages 11-18]
  • Hamzeh, Yahya Effect of Cationic Starch and Chitosan on Dry Strength of Bleached Soda Pulps Made of Pre-Extracted and Non-Extracted Bagasse [Volume 25, Issue 5, 2013, Pages 383-392]
  • Hashempour, Mohammad Thermoresponsive Membrane Based on Thermotropic Liquid Crystalline Cholesteryl - (L-lacticacid)n System: Study of Its Drug Permeability [Volume 25, Issue 5, 2013, Pages 365-373]
  • Hoseini, Mohammadyar Study of Thermal Properties, Turbidity, Effective Factors on Particle Size and Oscillatory Rheology of Pectin-Caseinate Biopolymer Nanocomplexes [Volume 25, Issue 6, 2013, Pages 433-447]

I

  • Imani, Mohammad Nanomechanical Properties of Photo-Cured Cyanoacrylate Bioadhesives Crosslinked by TMPTMA or POSS Nanostructures [Volume 25, Issue 1, 2012, Pages 53-64]

J

  • Jahanbiglari, Maryam Chromic Behavior of Conductive Poly(3-Methylthiophene) Nanoparticles-Coated Polyester Fabric [Volume 25, Issue 4, 2012, Pages 277-287]
  • Jalali Arani, Azam Molecular Diffusion of Toluene through CaCO3-Filled Natural Rubber Composites [Volume 25, Issue 2, 2012, Pages 137-150]
  • Jamshidi, Ahmad Determination of Glucose with Amperometric Method Using Polyaniline/Glutaraldehyde/Glucose Oxidase Modified Electrode [Volume 25, Issue 6, 2013, Pages 421-431]
  • Jamshidi, Hajar Preparation and Characterization of Hybrid Nanocomposite of Polyacrylamide/Silica-Nanoparticles [Volume 25, Issue 5, 2013, Pages 405-414]

K

  • Kaffashi, Babak Investigation of Dispersion, Interaction and Superstructure Formation in PTMEG/MWCNT Nanocomposites [Volume 25, Issue 4, 2012, Pages 289-300]
  • Keyhanpour, Ali Determination of Glucose with Amperometric Method Using Polyaniline/Glutaraldehyde/Glucose Oxidase Modified Electrode [Volume 25, Issue 6, 2013, Pages 421-431]
  • Khorasani, Zeinab Effect of Cationic Starch and Chitosan on Dry Strength of Bleached Soda Pulps Made of Pre-Extracted and Non-Extracted Bagasse [Volume 25, Issue 5, 2013, Pages 383-392]
  • Kokabi, Mehrdad Thermal Protection Performance of Phase Changing Material Based on Polyethylene Glycol [Volume 25, Issue 3, 2012, Pages 193-202]
  • Kokabi, Mehrdad Effect of Nanoclay on Mechanical Properties and Ablation Behavior of a Nitrile-Based Heat Insulator [Volume 25, Issue 6, 2013, Pages 449-458]

M

  • M. Nazhad, Mousa The Effect of Degree of Substitution of Cationic Starch on Multi-layer Formation of Ionic Starches in Recycled Fibers [Volume 25, Issue 1, 2012, Pages 11-18]
  • Madhoushi, Mehrab Effect of Nanoclay and Microwave Thermal Treatment on Mechanical Properties of MDF Dust-PP Nanocomposite [Volume 25, Issue 4, 2012, Pages 323-331]
  • Mazaheri, Leila Surface Modification of Silica Nanoparticles with Titanium Tetraisopropoxide and Evaluation of their Photocatalytic Activity [Volume 25, Issue 3, 2012, Pages 221-230]
  • Mehrdad Shokrieh, Mahmood An Estimation of Longitudinal Strength Reduction of Unidirectional E-glass/Epoxy Composite Exposed to Sulfuric Acid Using a Micromechanics Model [Volume 25, Issue 2, 2012, Pages 91-101]
  • Mehrdad Shokrieh, Mahmoud Extension of Slitting Method for Simultaneous Measurement of Residual Normal and Shear Stresses in Polymer Composites [Volume 25, Issue 4, 2012, Pages 301-313]
  • Mehrdad Shokrieh, Mahmoud Studies on Fracture Behavior of Epoxy/DWNT Nanocomposites by Molecular Dynamics Simulation [Volume 25, Issue 4, 2012, Pages 315-322]
  • Mir Mohamad Sadeghi, Gity Synthesis of Shape Memory Polyurethane/Nanoclay Composites: Chemical Structure and Interactions between Polymer and Nanoclay Particles [Volume 25, Issue 1, 2012, Pages 19-30]
  • Mirabedini, Sayed Mojtaba Surface Modification of Silica Nanoparticles with Titanium Tetraisopropoxide and Evaluation of their Photocatalytic Activity [Volume 25, Issue 3, 2012, Pages 221-230]
  • Mirzadeh, Hamid Effect of Solution Surface Tension on Morphology of PLGA and Gelatin Electrospun Fibers [Volume 25, Issue 1, 2012, Pages 3-10]
  • Mirzapour, Mir Asad Study on Ablation Behavior of Phenolic Composites Prepared with Different Amounts of Zirconia and Asbestos Fiber [Volume 25, Issue 3, 2012, Pages 181-191]
  • Moghadam, Farhad DEA-Impregnated Cross-Linked Polyvinyl Alcohol/Glutaraldehyde Polymeric Systems as CO2/CH4 Gas Separation Membranes [Volume 25, Issue 6, 2013, Pages 477-489]
  • Mokhtari, Javad Chromic Behavior of Conductive Poly(3-Methylthiophene) Nanoparticles-Coated Polyester Fabric [Volume 25, Issue 4, 2012, Pages 277-287]
  • Montazer, Majid Synthesis of Silver Nanoparticles in Cotton Fabric by Polyvinyl-2-pyrrolidone as a Reducing and Stabilizing Agent [Volume 25, Issue 4, 2012, Pages 265-275]
  • Mootab Saei, Amir Effect of Nanoclay and Microwave Thermal Treatment on Mechanical Properties of MDF Dust-PP Nanocomposite [Volume 25, Issue 4, 2012, Pages 323-331]
  • Moradian, Siamak Effect of Nanosilica Type on Properties of Polyethylene Terephthalane/Silica Nanocomposite [Volume 25, Issue 3, 2012, Pages 203-219]
  • Mousavi, Seyed Mohammad Films Based on Poly(lactic acid) Biopolymer: Effect of Clay and Cellulosic Nanoparticles on their Physical, Mechanical and Structural Properties [Volume 25, Issue 2, 2012, Pages 127-136]

N

  • N. Famili, M. Hossien The Effect of Surface Properties and Content of Nanosilica Particles on Polystyrene Foam [Volume 25, Issue 5, 2013, Pages 393-404]
  • N. Famili, Mohamad Hossein Heterogeneous Nucleation in Batch Foaming of Polystyrene in Presence of Nanosilica as a Nucleating Agent [Volume 25, Issue 3, 2012, Pages 231-240]
  • Naderi, Ghasem Mechanical and Morphological Properties of Waste Short Nylon Fibers and Nanoclay Reinforced NR/SBR Rubber Nanocomposites [Volume 25, Issue 6, 2013, Pages 491-501]
  • Nasir, Vahid An Estimation of Longitudinal Strength Reduction of Unidirectional E-glass/Epoxy Composite Exposed to Sulfuric Acid Using a Micromechanics Model [Volume 25, Issue 2, 2012, Pages 91-101]
  • Nikooamal, Hamid Reza Effect of Mixing Condition on Rheological Behavior of Epoxy-Clay Nanocomposites [Volume 25, Issue 3, 2012, Pages 241-250]
  • Nodehi, Azizolah Synthesis and Characterization of Low Density PMMA-based Microballoons [Volume 25, Issue 6, 2013, Pages 467-475]
  • Nosratzadegan, Keyvan Synthesis and Characterization of Low Density PMMA-based Microballoons [Volume 25, Issue 6, 2013, Pages 467-475]
  • Nouri, Mahdi Chromic Behavior of Conductive Poly(3-Methylthiophene) Nanoparticles-Coated Polyester Fabric [Volume 25, Issue 4, 2012, Pages 277-287]

O

  • Omidkhah, Mohammad Reza DEA-Impregnated Cross-Linked Polyvinyl Alcohol/Glutaraldehyde Polymeric Systems as CO2/CH4 Gas Separation Membranes [Volume 25, Issue 6, 2013, Pages 477-489]
  • Omrani fard, Hesam Mechanical Properties and Kinetics of Thermal Degradation of Bioplastics based on Straw Cellulose and Whole Wheat Flour [Volume 25, Issue 1, 2012, Pages 65-74]
  • Oromiehie, Abdulrasoul Films Based on Poly(lactic acid) Biopolymer: Effect of Clay and Cellulosic Nanoparticles on their Physical, Mechanical and Structural Properties [Volume 25, Issue 2, 2012, Pages 127-136]

P

  • Parvinzadeh Gashti, Mazeyar Effect of Nanosilica Type on Properties of Polyethylene Terephthalane/Silica Nanocomposite [Volume 25, Issue 3, 2012, Pages 203-219]
  • Pazokifard, Shahla Surface Modification of Silica Nanoparticles with Titanium Tetraisopropoxide and Evaluation of their Photocatalytic Activity [Volume 25, Issue 3, 2012, Pages 221-230]
  • Pishdad, Atefeh Investigation of Dispersion, Interaction and Superstructure Formation in PTMEG/MWCNT Nanocomposites [Volume 25, Issue 4, 2012, Pages 289-300]
  • Pourhossaini, Mohamad Reza Nanocomposite of SBR/Hydroxy-terminated Polybutadiene Grafted- Fumed Silica [Volume 25, Issue 2, 2012, Pages 103-112]
  • Pourjavadi, Ali Syntheses and Rheological Properties of Poly(nonadecanamide-co-ethylene glycol) Thickener [Volume 25, Issue 6, 2013, Pages 459-466]

R

  • Rabiee, Ahmad Preparation and Characterization of Hybrid Nanocomposite of Polyacrylamide/Silica-Nanoparticles [Volume 25, Issue 5, 2013, Pages 405-414]
  • Rahimi, Mohmmad Karim Synthesis of Silver Nanoparticles in Cotton Fabric by Polyvinyl-2-pyrrolidone as a Reducing and Stabilizing Agent [Volume 25, Issue 4, 2012, Pages 265-275]
  • Ranjbar, Heidar Synthesis of Polybutadiene Particles via Emulsion Polymerization: Effect of Emulsifier and Initiator Contents on the Reaction Kinetics and Latex’s Particle Size [Volume 25, Issue 5, 2013, Pages 351-364]
  • Rashidi, Abosaeed Effect of Nanosilica Type on Properties of Polyethylene Terephthalane/Silica Nanocomposite [Volume 25, Issue 3, 2012, Pages 203-219]
  • Razavi-Nouri, Mohammad Temperature Dependency of Poly(vinylidene fluoride) Chain Dimension in Solution and Melt State [Volume 25, Issue 1, 2012, Pages 31-40]
  • Razzaghi Kashani, Mehdi Nanocomposite of SBR/Hydroxy-terminated Polybutadiene Grafted- Fumed Silica [Volume 25, Issue 2, 2012, Pages 103-112]
  • Rekabdar, Fatemeh Synthesis of Polybutadiene Particles via Emulsion Polymerization: Effect of Emulsifier and Initiator Contents on the Reaction Kinetics and Latex’s Particle Size [Volume 25, Issue 5, 2013, Pages 351-364]
  • Rezaei Haghighat, Hasan Study on Ablation Behavior of Phenolic Composites Prepared with Different Amounts of Zirconia and Asbestos Fiber [Volume 25, Issue 3, 2012, Pages 181-191]

S

  • Sabetzadeh, Maryam Prediction of Mechanical Properties of LDPE-TPS Nanocomposites Using Adaptive Neuro-Fuzzy Inference System [Volume 25, Issue 3, 2012, Pages 171-180]
  • Sabzikar Boroujerdy1, Mostafa Bending Properties of Sandwich Beams with Fiber Metal Laminate Face Sheet [Volume 25, Issue 5, 2013, Pages 375-382]
  • Sadeghi, Saeb Syntheses and Rheological Properties of Poly(nonadecanamide-co-ethylene glycol) Thickener [Volume 25, Issue 6, 2013, Pages 459-466]
  • Sadeghi Ghari, Hedayatollah Molecular Diffusion of Toluene through CaCO3-Filled Natural Rubber Composites [Volume 25, Issue 2, 2012, Pages 137-150]
  • Sadighi, Mojtaba Bending Properties of Sandwich Beams with Fiber Metal Laminate Face Sheet [Volume 25, Issue 5, 2013, Pages 375-382]
  • Safi, Mahdi PMMA/CB and PMMA/MWCNTs Nanocomposites: Assessments through Optical Behavior [Volume 25, Issue 4, 2012, Pages 255-263]
  • Safi, Somayeh Fabrication of Aligned Nanofibers by Manipulated Rotating Drum Method and Studying the Effective Parameters on Fibers Alignment by Image Processing [Volume 25, Issue 5, 2013, Pages 339-350]
  • Salarian, Mohammad Mahdi Effect of Polyamide 6 on Crystalline Structure of Polymer in PVDF-Nanoclay Nanocomposite [Volume 25, Issue 1, 2012, Pages 41-51]
  • Salimi, Ali Temperature Dependency of Poly(vinylidene fluoride) Chain Dimension in Solution and Melt State [Volume 25, Issue 1, 2012, Pages 31-40]
  • Seyed Mohaghegh, S. Mohammad Determination of Glucose with Amperometric Method Using Polyaniline/Glutaraldehyde/Glucose Oxidase Modified Electrode [Volume 25, Issue 6, 2013, Pages 421-431]
  • Shadlou, Shahin Studies on Fracture Behavior of Epoxy/DWNT Nanocomposites by Molecular Dynamics Simulation [Volume 25, Issue 4, 2012, Pages 315-322]
  • Shahriari Kahkeshi, Maryam Prediction of Mechanical Properties of LDPE-TPS Nanocomposites Using Adaptive Neuro-Fuzzy Inference System [Volume 25, Issue 3, 2012, Pages 171-180]
  • Shakeri, Alireza Effect of Nanoclay and Microwave Thermal Treatment on Mechanical Properties of MDF Dust-PP Nanocomposite [Volume 25, Issue 4, 2012, Pages 323-331]
  • Shakouri, Zahra Molecular Diffusion of Toluene through CaCO3-Filled Natural Rubber Composites [Volume 25, Issue 2, 2012, Pages 137-150]
  • Shamei, Ali Synthesis of Silver Nanoparticles in Cotton Fabric by Polyvinyl-2-pyrrolidone as a Reducing and Stabilizing Agent [Volume 25, Issue 4, 2012, Pages 265-275]
  • Shamsi, Mohsen Mechanical Properties and Kinetics of Thermal Degradation of Bioplastics based on Straw Cellulose and Whole Wheat Flour [Volume 25, Issue 1, 2012, Pages 65-74]
  • Sharifi-Sanjani, Naser Preparation and Characterization of Phenolic Resin/Montmorillonite Nanocomposite [Volume 25, Issue 2, 2012, Pages 83-90]
  • Shokrollahi, Parvin Polycaprolactone/Polytetrahydrofuran Supramolecular Polymer Blends: Mechanical and Thermal Properties [Volume 25, Issue 2, 2012, Pages 151-163]
  • Sodeifian, Gholamhossein Effect of Mixing Condition on Rheological Behavior of Epoxy-Clay Nanocomposites [Volume 25, Issue 3, 2012, Pages 241-250]
  • Soltan-Dehghan, Morteza Preparation and Characterization of Phenolic Resin/Montmorillonite Nanocomposite [Volume 25, Issue 2, 2012, Pages 83-90]
  • Soltani, Sedigheh Mechanical and Morphological Properties of Waste Short Nylon Fibers and Nanoclay Reinforced NR/SBR Rubber Nanocomposites [Volume 25, Issue 6, 2013, Pages 491-501]

Y

  • Yaghani, Reza DEA-Impregnated Cross-Linked Polyvinyl Alcohol/Glutaraldehyde Polymeric Systems as CO2/CH4 Gas Separation Membranes [Volume 25, Issue 6, 2013, Pages 477-489]
  • Yazdanshenas, Mohamad-Esmail Effect of Nanosilica Type on Properties of Polyethylene Terephthalane/Silica Nanocomposite [Volume 25, Issue 3, 2012, Pages 203-219]
  • Yousefi, Ali Akbar Temperature Dependency of Poly(vinylidene fluoride) Chain Dimension in Solution and Melt State [Volume 25, Issue 1, 2012, Pages 31-40]
  • Yousefi, Ali Akbar Effect of Polyamide 6 on Crystalline Structure of Polymer in PVDF-Nanoclay Nanocomposite [Volume 25, Issue 1, 2012, Pages 41-51]
  • Yousefi, Ali Akbar The Effect of SWCNT and MWCNT on Properties and Crystalline Structure of Polyvinylidene Fluoride [Volume 25, Issue 2, 2012, Pages 113-125]
  • Yousefi, Ali Akbar Effect of Mixing Condition on Rheological Behavior of Epoxy-Clay Nanocomposites [Volume 25, Issue 3, 2012, Pages 241-250]
  • Yousefi, Ali Akbar PMMA/CB and PMMA/MWCNTs Nanocomposites: Assessments through Optical Behavior [Volume 25, Issue 4, 2012, Pages 255-263]
  • Yousefi, Mohammad Reza Synthesis of Polybutadiene Particles via Emulsion Polymerization: Effect of Emulsifier and Initiator Contents on the Reaction Kinetics and Latex’s Particle Size [Volume 25, Issue 5, 2013, Pages 351-364]

Z

  • Zakiyan, Seyed Esmaeil Heterogeneous Nucleation in Batch Foaming of Polystyrene in Presence of Nanosilica as a Nucleating Agent [Volume 25, Issue 3, 2012, Pages 231-240]
  • Zakiyan, Seyed Esmaeil The Effect of Surface Properties and Content of Nanosilica Particles on Polystyrene Foam [Volume 25, Issue 5, 2013, Pages 393-404]
  • Zamani Pedram, Mona DEA-Impregnated Cross-Linked Polyvinyl Alcohol/Glutaraldehyde Polymeric Systems as CO2/CH4 Gas Separation Membranes [Volume 25, Issue 6, 2013, Pages 477-489]
  • Zandi, Mojgan Effect of Solution Surface Tension on Morphology of PLGA and Gelatin Electrospun Fibers [Volume 25, Issue 1, 2012, Pages 3-10]
  • Zandi, Mojgan Nanomechanical Properties of Photo-Cured Cyanoacrylate Bioadhesives Crosslinked by TMPTMA or POSS Nanostructures [Volume 25, Issue 1, 2012, Pages 53-64]
  • Zojajian, Afshin Fabrication of Aligned Nanofibers by Manipulated Rotating Drum Method and Studying the Effective Parameters on Fibers Alignment by Image Processing [Volume 25, Issue 5, 2013, Pages 339-350]